GLASS MANUFACTURER MAIN PRODUCT
======================================
HYSHWFK4-1800X300
Composed four heads, fixed column, movable column, frame, linear guide, pneumatic system, auto output, pushing section, CNC/Program parts.
By adjusting the limit bolt of the movable sliding base, it can accomplish normal welding with welding seam adjustable, by adding welding plate, it can accomplish multilayer welding. High performance pneumatic parts, linear guide system with the characteristic of easy maintenance and long using life.
Easy operation control system with friendly used surface, and stable CNC System.
Module design for the heads, with high rigidity and strength, which enables more stable for the machine.
Adopts advanced parallel welding technologies and special synchronous structure.
CNC Double Precision Mitre Saw–HYLSJK05-500X4500
•Machine guide and head feeding adopted liner bearing system, Alu-profiles cuttable by change the cutting saw.
•Install cutting angle device ( between 45 and 90 degree) according to the customer demand.
Technical Parameters:
Four-Head Welding Machine(Seamless)–HYSWFH4-180X3000
•Processes all kinds of colored profile, welds without seams, cleans top, bottom and outer welding tumors at one time. Smooth and clean welded seam.
•Simultaneous press welding techonlogy with high welding intensity.
•Processes single or double layers welding with cutters and fixtures.
•Special, reasonable and stable structure for the whole machine with reliable operation.
HYDM-01-80 End Router(A)
•Used for special-shaped screw-connected transom profile end milling.
•Pneumatic clamping and manual feeding,capable of end milling different profoles with different sections by changing to different cutters.
Technical Parameters
Welding Machine (Seamless)
•Produces all kinds of colored profile,welds without seams.cleans top,bottom and outer welding tumors at one time,smooth and clean welded seam.
•Simultaneous press welding technology with high welding intensity.
•Produces single or double layers welding with cutters and fixtures.
•Special,reasonable and stable structure for the whole machine with reliable operation.
•PLC control system,high quality electrical parts with reliable and convenient performance.
Technical Parameters:
HYSLJ-120 Vertical Cutting Center
•Composed of cutting section, feeding section, clamping section, auto unloading section and so on.
•Completes cutting process automatically.
•Cutting without waste, greatly saves profiles.Technical parameters:
•Power supply 380V/60Hz
HYSF-200 Double Axis Copying Router
•Pneumatic clamping, high speed milling and automatic cooling.
Technical Parameters:
HYSC-01 Lock Hole Slot Process Machine
•Composed of three-hole drillers and copy router, pneumatic clamping and atomatic cooling .
•One-pass clamping, can complete two processes and achieve drilling three holes in the horizontal direction and replicate routing in the vertical direction.
Technical Parameters:
HYVQ-120 V Notch Cleaning Machine
•Pneumatic clamping, complete one-pass V-shape welded seam cleaning or cross transom cleaning on two surfaces.
Technical Parameters:
HYDX-01 Multi-function Single Head Router
•Complete one-pass routing of two drain slots and pneumatic balance slots of various profiles.
•Process various pulley slots, lock hole slot, hardware component slots and others with hole duplicating function.
•PLC control, complete routing drain slots in two different directions through one-pass clamping. Efficiency is two times as much as double-axis drain slot router.
•Upper milling machine head adjusts freely at 0°~45° to route drain slots at various angles.
Technical Parameters:
HYDX-02 Multi-function Double Head Router
•Complete one-pass the routing of four drain slots and other slots on various profiles.
•Processes various pulley slots, lock hole slots, hardware component slots and others with slot and hole duplicating function .
•PLC control, completing routing of drain slots in two different directions through one-pass clamping. Efficiency is four or five times as much as double axis drain slot router.
•Upper milling head adjusts freely from 0°~45° to accomodate drain slot routing at various angles.
Technical parameters:
HYSH(2+2)-130-3500 Horizontal Double-four-head Welding Machine
•Welding four corners at one time, single and double transom, cross trasom and special angles. Possess all fuctions of four, three-, two-, one-head welding machines. Four heads can work simultaneously, indvidually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automaic window unloading system, simple operation with low labor intensity.
Technical Parameters:
HYSH(3+3)-130-3500 Horizontal Double-six-head Welding Machine
•Welding six corners at one time, single and double tansom, cross transom and special angles. Processes all funcions of four-, three-, two-, one-head welding machines. Six heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
•Semi-automatic window unloading system, simple operation with low labor intensity.
Technical parameters:
HYSH2-130-3500 Two-head Welding Machine
•Welding two-point, one point, transom, cross-transom and special angles. Two heads can work simultaneously, individually or in combination.
•Protection guards. •PLC control, pneumatic drive with high reliability. Technical parameters:
•Power supply 220V/50Hz
HYSH3-130-3500 Three-head Welding Machine
•PLC control, pneumatic drive with high reliability.
HYSH4-130-3500 Four-head Welding Machine
•Welding four three two or one corner ,transom, cross-transom and special angles.Four heads can work simultaneously, individually or in combination.
•PLC control, pneumatic drive with high reliability.
Technical Parameters
HYSH4T-130-4500/HYSH4T-200-4500 Four-head Welding Machine
•Welding four, three, two or one corner, transom, cross transom and special angles. Four heads can work simultaneously, individually or in combination.
•Protection guards.
•PLC control, pneumatic drive with high reliability.
Technical Parameters:
HYSHKG4-1800×3000 Horizontal Four-point Welding Machine
•The two upper clamps prevent the finished window from misplacing when multiplayer welding.
•The pneumatic component and linear pairing element feature high precision, easy maintenance and long performance life.
•Easy operation control components, friendly visual interface and stable CNC system.
•This machine adopts modularized desigh, whose rigidity and intensity have a great improvement. So function of the whole machine becomes more stable.
•The machine adopts advanced parallel welding and unique synchronous structure.
•The machine feature large welding scope, high angle intensity, high precision finished window and high auto.
Technical Parameters:
HYLJKS02-120 CNC Vertical Cutting Centre
•High precision: three fixed saw blades.No adjustment needed for 45°and 90°cuts and no adjustment error; no dry running for saw blades. Air -liquid conventor driven device avoids crawling of air cylinder drive and assures stable running.•High efficiency : Computer controlled system sets process requests. Servo system drives automatic feeding, cutting and unloading. Vertical and reciprocating cutting has no dry cutting and its efficiency is two times greater than that of double mitre saw.•High security : Fully closed structure for safe and stable operation.•High profile saving ratio :Computer optimized process syestem.•Special mechanical device can achieve the best optimum cutting, have two stub bar cutting, and save 20%-30% profiles compared with double mitre saw. Automatic loading and unloading system can save0%-70% manual work compared with double mitre saw.•Servo motor, spindle drive motor and main electrical parts adapt to Japanese,Geman and Italian brands.
Technical Parameters:
HYSHQX4-2000 CNC Welding and Corner-cleaning Producing line
•This line can achieve automatic welding, cleaning and feeding of rectangle windows in enormous quantities.
•This line adopts import CNC drive system, which features easy operation, friendly inferface, stable system, energy-efficient and high degree of automation.
•The welding machine can weld two or four layers PVC profiles, large welding scope and high working efficiency.
•Excellent technology of the welding machine fully ensures the high intensity angles and consistency of finished windows when multilayer welding.
•Modularity design of welding heads ensures the high structure intensity, rigidity and stable function.
•The welding heads are equipped with two upper clamps in order to avoid upper and lower surface misplace and ensure the high planeness of the finished windows.
•The profile fixtures can satisfy the locating weld of different profile.
•Automatic drawing mechanism.
•Two CNC double head cleaning machines achieve four corners omni-directional cleaning. Servo motor drive brings about high speed cleaning.
•Each cleaning head is equipped with eight tools, which can fully satisfy multi-level cleaning requirement over one hundred kinds of profile.
•Auxiliary manipulator finishes the movement from welding to cleaning.
•The total line is horizontal disposition, which features excellent design, consistent process.
HYLSJ03-450×5000 Double Mitre Saw
•One time four pieces of profiles cutting available (height of the profile should be less than 60mm)
•Machine guide and head feeding adopted linear bearing system
•Automatic machine head brake
•Reasonable structure and high processing precision
•Digital display the profile cutting length and quantity
•With head fine adjusting device