GLASS MANUFACTURER MAIN PRODUCT
======================================
ZM-16 type (16 grinder) Glass Straight Line Double Edging Machine
Products :
product is suitable for grinding flat glass straight line double edge. Coarse grinding, fine grinding and polishing in one step. Grinding seat sliding dual linear motion guide, double ball screw drive, in order to reach a steady speed, eliminating the mobile space, reducing obstruction and abrasion strength, to ensure repeatability. PLC control system explorer interface to set the process parameters through a complete processing. Transmission belt drive adopts frequency conversion motor speed control, constant power, constant torque output, stable and reliable.
This product has a stable solid structure, flawless drive, the configuration control system and high-medium and small size of the processing capacity, suitable for glass and construction industry the processing.
main parameters:
Products :
XM261A line Beveling glass using two grinding machines, a repair bottom, three grinding, three polished design. CVT adjustment of processing speed, this device is easy to operate, easy maintenance, the company is in the previous generation product improvements made ??on the basis of the ideal equipment
main parameters:
Feed rate: 0.5-4m/min
Minimum processing area: 60mmx60mm
Glass thickness: 3-25mm
Power: 19Kw
Area: 6.8mx1mx2.5m
Weight: about 4200Kg
Hypotenuse maximum width: 35mm
Angle: 0-30
Products :
YM1 glass cylindrical grinding machine for round, oval, straight edges, and other irregular shape of the molding around the grinding and polishing glass. Can round or slightly oval-shaped glass semi-automatic grinding. Using different semi forming grinding wheels can be side, flat side, duck Tsui side equilateral.
main parameters:
Power supply: 380 V AC 3φ 50 HZ
Ambient temperature: 1 ℃ ~ 40 ℃
Relative humidity: ≤ 90%
Vacuum is required to achieve: -0.05 MPa ~ -0.1 MPa
Water pressure: 0.1 MPa ~ 0.2 MPa
Air pressure: 0.6 MPa ~ 0.8 MPa 68L/min
Machinable Glass Thickness: 3 mm ~ 40 mm
Machinable glass peripheral diameter: φ100 mm ~ φ1600 mm
Machinable Glass Week diameter: φ150 mm ~ φ600 mm
Within the smallest radius of curvature: R75mm
Wheel speed: 2850r/min
Table speeds: 0.4 r / min ~ 2.0 r / min
Installed power: 4.2KW
Host Height: 1915 mm
Maximum rotation radius: 960 mm
Work surface height: 1100 mm
Weight: about 700Kg
Products :
automatic smart glass Loading machine + Automatic CNC glass cutting machine + Automatic Breaking Taiwan
After a quick technical update, using the latest international technology and processing technology, the performance of the domestic lack of poorly machine and cutting machine failure, unstable performance of a full upgrade, developed with the international advanced level of automatic glass cutting line this equipment and the technical indicators have reached or exceeded the parameters of the same type of equipment abroad. This machine can completely replace the imported equipment, imported cutting machine to break the long-standing monopoly of the Chinese market situation.
performance:
Advanced mechanical structure supporting the Italian import control system and cutting optimization software. Greatly improved the quality of glass and cut cut cut rates. Create a domestic high-end automatic cutting lines, to achieve automatic Loading glass / automatic transmission / automatic positioning / automatic optimization / automatic cutting and automatic breaking film work.
main parameters:
Loading speed :30-70 sec / piece
Cutting accuracy: ≤ ± 0.02mM
Cutting speed: 140m/min
equipment features : greater security, faster, more accurate precision, easier operation, higher rate optimization, stability, better, more whole, more labor-saving and so on.
Scope : construction, hollow doors and windows, cars, appliances, furniture, solar, kitchen bathroom, lenses, glass and other crafts glass cutting operation
Products :
ZJ130 nesting drilling machine is our company design and manufacture of new glass nesting drilling machine, which is characterized by: the use of gas – liquid damping joint control, to ensure that the drilling thin glass; good rigidity, large diameter drilling, machine Block deep throat diameter, can process large-size glass; low table height, easy to operate. Automatically under the drill bit, drill manual feed, processing, superior performance. Machine production efficiency and can be used in mass production and assembly line, is essential for the glass deep processing manufacturer of processing equipment.
main parameters:
1 work surface height: 870 mm
2 spindle to column distance: 1300 mm
3 cone drill and drill holes and screw coupling end: taper cone angle of 60o, screw diameter, G1 / 2 “
Products :
ZM9DJ linear multi-level glass edge grinding machine for grinding flat glass of different sizes and thickness of the flat side, and side edges of the grinding stage. Level before the chamfer edge grinding and grinding with the front beam as a whole can advance and retreat, level edge angle, change the thickness of the glass easy to adjust. With the thickness of the continuous processing of flat glass, polished flat edge, close to the glass side of the mother’s level finish. This unit has manual and digital two specifications.
main parameters:
1 processing minimum size: 80 * 80mm
2 Glass thickness: 3 ~ 25mm
3 Processing speed: 0.6 ~ 5.8m/min
4 Weight: 3500KG
5 Power: 20.3KW
6 Size: 7800 * 1400 * 2500mm
7 grinding quantity: 9pcs
8 angle: 0 ~ 45 °
Products:
The machine according to user requirements for cleaning and drying 3-15mm, the machine uses the level of horizontal structure, plate glass placed on a transfer roller, through the feed section, the working section, to reach the feeding section. Glass transmission rate according to process requirements, stepless adjustment. Air temperature can also be set in advance according to need.
The main parameters:
Max size: 1100 * 2000
Minimum processing size: 100 * 150mm
Glass thickness: 3 ~ 15mm
Processing speed: 0.7 ~ 3.5m/min
Brush Quantity: 4 pairs
Weight: 800KG
Power: 8KW
Size: 3400 * 1600 * 1020mm
Products :
Glass blasting machine uses compressed air to form the anti-smoking anti-vacuum pressure, the sand jet to the machined surface removal processing materials. The machine can be used for processing of frosted glass, flat glass surface pattern, three-dimensional sculpture and shaped parts of the surface polishing, cleaning and so on. Not only for the glass, but also with stone, iron and other brittle materials processing. The machine is equipped with separate vacuum system, no dust pollution; sand recycling, small footprint, simple operation, low processing costs.
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass Straight Line Double Edging Machine
GLASS MANUFACTURER CONTACT INFO
======================================
Address: Shunde District, Foshan City, Guangdong Province Industrial Park Road, London Yongfeng
Tel:0757-27839336 27832075
Phone:13760978089
Fax:0757-26904753 Contact:Mr.Zeng
Web:http://www.htxbljx.com
E-mail:htxbljx@htxbljx.com
QQ:944310606 1345202005
GLASS MANUFACTURER COMPANY PROFILE
======================================
Shunde London Hong Taixin Glass Machinery Factory is a professional manufacturer of glass machinery business, located in Shunde, Guangdong, London. In the original equipment assembly, repair and renovation based on the experience and gradually developed into a self-design, processing, manufacturing, assembly, and has a perfect after-sales service of glass processing equipment manufacturers. In glass machinery should function based on the Hong Taixin particular attention to the internal components of the stability of the product. Years of professional skill set of R & D, our company has been able to create a series of targeted customers to meet the different needs of glass deep-processing equipment, received wide acclaim with the same trust.