GLASS MANUFACTURER MAIN PRODUCT
======================================
About this product:
Product Feature:
Equipped with roller working table, arris grinding can be finished swiftly. There are two models of the machine ,one is dry model which eqipped with a dust collecty device, the other is wet model which fixed with a watering device.
Product Features:
1.Foundation seat is an integral casting and working to ensure not to become deformed permanently.
2.Grinding with high precision and high speed, adapt for large flatbed construction glass.
3.Main electric items are imported, ensure the precision of equipments and working items.
4.Adopt PLC programmed control, set over 100 control points, automatically control breakdown.
SM45 300mm×4500mm 4mm-30mm 0-80mm/s 4mm 45kW
SM40 300mm×4000mm 4mm-30mm 0-80mm/s 4mm 40kW
SM25 300mm×2500mm 4mm-30mm 0-80mm/s 4mm 40kW
About this product:
Product Feature:
1.Adapt for the drill of large flatbed screen wall glass.
2.Working glass dimension with high precision.
3.Main electric items, such as leading screw, slideway, PLC are imported.
4.PLC programmed control.
Product Features:
1.Control with PLC program system.
2.Top layer of the oven is easy to be lifted up for roller maintenance.
3.The shape transformation of lower windscreen controlled by means of hydraulic cylinder. The glass sheet in plastic state bend and transform with lower windscreen lowering and roller. When the upper windscreen lowering and closing, the positioning channel on chain plate coincide with the positioning shaft of lower windscreen, to secure the same curvature radius of lower & upper windscreen.
Product Features:
1.High optical quality, no any distortion, wave and other defects on the surface, easy to laminated fabricating.
2.Suitable tempered any shape, any thickness glass including bent glass.
3.Can temper ultra-thin glass, the max. limit of physical tempering is 2.8mm ,chemical tempering is over 0.5mm.
4.High intensity,3-5 times intensity as much as physical tempering glass.
5.It can produce single-chip fireproof glass of high intensity.
HG1824 1800mm×2400mm 0.5-12mm 0.6MPa 400mm/min 200mm/min 420kW
HG1830 1800mm×3000mm 0.5-12mm 0.6Mpa 400mm/min 200mm/min 480kW
HG2436 2400mm×3600mm 0.5-19mm 0.6MPa 400mm/min 200mm/min 520kW
HG2440 2400mm×400mm 0.5-19mm 0.6MPa 400mm/min 200mm/min 560kW
About this product:
Product Feature:
RB28 glass hot bending furnace is composed of three parts, with the middle part as the heating furnace, and the parts at two sides are for charging and discharging respectively. The three parts are connected with each other through a rail. There are two tailers, one of which is heated inside the furnace, and other stays outside for annealing or up and down glass.
Product Feature:
RB2 glass hot bending furnace is composed of three parts, with the middle part as the heating furnace, and the parts at two sides are for charging and discharging respectively. The three parts are connected with each other through a rail. There are two tailers, one of which is heated inside the furnace, and other stays outside for annealing or up and down glass.
Product Feature:
1.According to the requirement, stretch to different radian fan-shaped and other shapes.
2.Cooling section is water cool. The effect of cooling is stable.
3.The thickness of worked film is even. And the rough of the film will not be changed.
4.Operation convenient, high efficinecy.
Product Feature:
1、Good pumping vacuum no bubbles.
2、For automobile glass production in batches.
3、Easy operation, saving transport.
Product Feature:
2.Cold air are uesed to make sure the glass are fully dry.
3.The washing and drying section can be rose up to 400mm.
4.The thickness of washing glass is digital-display.
Product Feature:
1.Washing water can be circulated.
2.Cold air are uesed to make sure the glass are fully dry.
3.The washing and drying section can be rose up to 400mm.
4.The thickness of washing glass is digital-display.
Product Feature: 1.Washing water can be circulated. 2.Cold air are uesed to make sure the glass are fully dry.3.The washing and drying section can be rose up to 400mm.4.The thickness of washing glass is digital-display.
Product Features:1、Flat&bent laminated glass;2、Temperatuer and pressure auto-control;3、Safe inter-locking device;4、Dynamic sealing system。
Product Feature:1、Flat&bent laminated glass;2、Temperature and pressure auto-control;3、safe inter-locking device.
Laminated glass is made of two or more pieces of glass panes, which are laminated with PVB interlayer under high temperature and high pressure. Laminated glass processing line is necessary equipment for construction glass, decoration glass, wind-screening glass and bulletproof glass. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation. Reference:
GLASS MANUFACTURER PRODUCT LIST
======================================
• Laminated Glass Production Line
• Autoclave
• SP25Loading(Unloading)machine
• Glass Washing And Drying Machine
• Combinating Machine
• Pre-Heating And Pre-pressing Machine
• Vacuum Pre-pressing Machine
• Film Stretching Machine
• Laminated Glass Vacuum Cabinet
• Bullet_Proof Glass Cutter
• Thermal Bending Furnace
• Chemical Glass Tempering Furnace
• Vacuum Glass Machine
• Vertical Coordinate Drilling Machine
• Grinding Equipment
GLASS MANUFACTURER CONTACT INFO
======================================
Tel: 86-24-23786583 (tel)
86-24-83783088 (Ministry of Foreign Trade)
86-24-23780148
86-24-23780240
86-24-23780238
Web:http://www.bfglass.com
E-mail:info@bfglass.com
GLASS MANUFACTURER COMPANY PROFILE
======================================
LiaoNing North Glass Machine Co. Ltd