OPTICS MEASUREMENT ROLL COATING GLASS MEASUREMENT GLASS DETECTING

======================================
GLASS MANUFACTURER MAIN PRODUCT                                  
=====================================

LOW-E GLASS MEASUREMENT >> AE5800

It is used to assembled on tempered glass or insulating glass production line, and can identify which side is Low-E coated.

Online Detecting System for Tempered Glass Line

It is used to inspect stress distribution in tempered glass line and timely display the stress images for identifying the quality of tempered glass.

Online Optical Density Measurement System

It is used to inspect the changes of optical density during the film-coated process and can give the precise changing curve.

Desktop Spectral T&R Instrument for IG

It is used to measure the transmission & reflection spectra and the color of Insulating Glass, which there is no destroy to the IG.

Gasglass Handheld v2(GASGLASS)

Gasglass technology for gas analyzing is a non-invasive method for measuring argon or krypton fill level inside insulated glazing (IG) units.

Tin Side Detector Pro2 (TS560A)

It is used to detect Tin Side Instantaneously. With Tin Side Indication; Powered by Dry cells; Longer Life-Span.

Desktop High Precise Sheet Resistivity Device

The Device for Measuring the Sheet Resistivity with 4-point Measuring Method and has 6 measuring ranges (from 0 … 0,2 mOhm/sq to 0 … 200 kOhm/sq)

Handheld Sheet Resistivity Device(StratometerG)

Handheld device for contactless measuring of sheet resistivity with high-frequency method. And can measure electrical conducting metal surfaces on films, glass, paper, plastic, etc.

 Device for non-contact measuring of sheet resistivity(SR12TS)

The device is used to measure small surfaces e.g. segmented films. Recommended for capacitor foils. Smallest measuring spot is 7 mm . Spacing for samples: 0,5 or 1 mm.

Glass-Chek Glass & Air Space Meters(MG1500)

Glass-Chek Glass & Air Space Meters

Frost Point Apparatus(D100)

It is used to measure the frost or dew of IG, which suitable for being used in Laboratory or locale spot

Spectral Transmission Instrument for PV Glass (ST100)

It is used to measure the spectral transmission for PV glass for calculating effective transmission, which can directly measure without polishing glass.

Multi-Channel Transmittance Measurement System(GCT-1 )

It is used to measure the spectral transmission for flat glass, coated glass. 9 to11 probes can be equipped according to the glass width and measuring interval is 50ms.

Distributing Spectral Transmission Measurement System

It is used to measure the spectral transmission for single point in magnetron sputtering coating line. It can be assembled original  spot, vacuum chamber and finished product spot.

R-Chek+ Surface Resistivity Meter – RC3175

＆#8226; Measure Sheet Resistance in ohms/sq

＆#8226; Uses 4 point technique

＆#8226; Range = 0-199.9 ohms/sq

On-line Scanning Spectral Reflectance Measurement System  for Float Glass Line

It is an on-line system for continuously measuring the spectral reflectance of coating glass based on the optional configuration. Then calculate the color, chromatic aberration and homogenization etc.

PV Glass Spectral Transmittance(ST150)

To be used to measure Spectral Transmittance of solar PV glass.

Safety Automotive Glass Transmittance Tester(SGT-3)

To be used to measure Transmittance  for automotive and flat glass.

Self Cleaning Coating Detector– Model#RD1350

The RD1350 is capable of identifying the presence and location of SELF-CLEAN coatings that are photocatalytic with hydrophilic properties. The meter uses state of the art technology coupled with microprocessor control to achieve an EASY-TO-USE hand held meter. The tool is powered by a 9 volt alkaline battery (included).

Photocatalytic coatings should be placed on the exterior surface of a window. The photocatalytic coating uses the sun’s UV light to gradually break down, loosen and dissolve dirt and soil. The coating effectively vaporizes dirt that is on the surface of the glass.

The hydrophilic properties of the coating prevent water from beading when it hits the surface of the glass. Therefore the water has a sheeting effect when it contacts the glass surface. The sheeting effect allows water to carry dirt away from the surface, and prevent the window from streaking or allowing water spots to occur.

The RD1350 meter has been specifically calibrated to detect the presence of the self clean coatings from Pilkington and PPG.  If you would like to test other self-clean coatings, please contact one of our sales representatives to discuss your application

BTU Solar Power Meter–MODEL# SP1065

The ability to block SOLAR energy is a key performance criteria for windows. Implement the SP1065 DIGITAL BTU Solar Meter into your sales presentation and educate your customer on the solar performance of your window. The SP1065 is a durable and compact meter that has excellent resolution. The meter is powered by a 9 volt battery and includes a digital display that shows continual solar measurements. The meter is extremely simple to use; just turn on the meter and start taking readings. There are no cumbersome adjustments needed. You can take readings using the sun, or for indoor settings you can use our Infrared Heat Lamp (EDTM Model #HL1040). Along with the SP2065 meter, the SP1065 does a GREAT job of showing your customer the benefits of energy-saving low e coatings, especially high performance spectral selective coatings. Use this lower cost meter to sell your customers up to your high-end products that are more profitable for you.

The Most Important Element of All Window Sales Kits

Perfect for tabletop sales demonstrations
Solar Power readings in BTUs/Hr-Ft2
DIGITAL modern-day technology
Identify high performance windows
Increase sales by educating your customers

Strengthened / Tempered Glass Detector

Confirm if your single or double pane glass has been strengthened.

Test single or multiple panes. On double pane glass, you can test both panes at the same time. This is especially helpful with installed windows when one side of the glass is difficult or impossible to get to. It is also much more efficient in the factory – being able to test either side offers huge time savings and is much more simple than being required to test both sides.

＆#8226; Identify thickness of the first pane of glass.

To use, simply slide the meter across the glass and conveniently watch the reflections from the glass head on. As the meter crosses stress lines in the glass (caused by the strengtheneing process), the resulting surface reflections from our wide array of light sources will change color. The special optics of the SG2700 product provide a robust change in color, and is great for applicatinos where the stress lines are more difficult to view.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
OPTICS MEASUREMENT
No sub-class 

 THIN FILM OPTICS
No sub-class 

 ROLL COATING GLASS MEASUREMENT

DESKTOP INSTRUMENT

ON-LINE MEASUREMENT

 FILMED GLASS DETECTING
No sub-class 

 GLASS DETECTING
No sub-class 

 PV GLASS MEASUREMENT
No sub-class 

 LOW-E GLASS MEASUREMENT

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Tel: 86-10-51122589
Email: emily@aoptek.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Beijing Aoptek Scientific Co., Ltd. was formerly registered as Btoe Optoelectronic Technology Institute in 1991 and Btoe Optoelectronic Technology Co. Ltd. in 1996 in Beijing. In 2005, the new high-tech company AOPTEK was registered. Since being establishment, the company has been committing to designing, developing, producing and selling on photoelectric detecting products. Through research & innovation for nearly 20 years, the detecting products covers the optical coat detecting, architectural glass detecting, spectral measurement equipment and other industrial colors & optical performance measurement, etc. The company represents the highest level in advanced technology, reliability, integration, standardization, serialization, etc.

Our important clients include famous enterprises, research institutes and colleges or universities, such as the National Metrology Center, the China National Aerospace Center, the Chinese Academy of Sciences Institute of Semiconductors, 8358 institute(Tianjin), Beijing Institute of Technology, Beihang University, Suzhou University, CSG  Holding Co., Ltd., Weihai Bluestar Glass Co., Qinhuangdao Yaohua Glass Co., Ltd, Chengdu Telecom Glass Co., Nantong Yu Di Optical Instruments Ltd., Canon Co., Ltd, (Zhuhai), etc.

AOPTEK (Aoptek Scientific Co., Ltd.) and GOLDEN WAY (Golden Way Scientific Co., Ltd.) are joint enterprise, which business are complementary and resources are sharing. The business of Golden Way mainly covers importing & exporting optical components. AOPTEK are responsible for installing on-line systems, developing software and providing good service for clients.

We believe that, through our continuing effort, AOPTEK will become your reliable supplier and best cooperator. From our website, you will find our main products including optical measurement equipment, optical film products, coat glass detecting equipment, spectral photometric instruments, etc., and we can provide OEM service according to your requirements.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .