GLASS MANUFACTURER MAIN PRODUCT
====================================== Product Introduction :
Description
It is one-part acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding. Where to use
They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration. They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, powder-coated and non-oily wood. Characteristic
1. One -part, acetoxy room temperature cure, easy to apply.
2. Excellent contact-change ability, no seasonal limited use.
3. Excellent adhesion to most building materials.
4. Outstanding weatherproofing ability, with service life of tens of years.
5. Medium or low modulus, excellent tensile and compression restoring ability. Application
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry.
2. For better appearance cover outside of joint areas with masking taps before application.
3. Cut nozzle to desired size and extrudes sealant to joint areas.
4. Tool immediately after sealant application and remove masking tape before sealant skins.
Limitations
1. Don’t use to the joints, which is hidden in earth for long time.
2. Don’t use in areas where no moisture has.
3. Don’t use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins, etc.
4. The surfaces coated with paint are unsuitable for sealant.
5. The products have poor adhesion to concrete, marble, mirror-glass, Zn-plated materials because of corrosion produced by acetoxy sealant. In this case, please select neutral silicone sealant.
Technical Data (for reference)
Specifications
JC/T 485; GB/T 14683-2003 A G 20LM; ISO11600 F class 20LM
1. Packing: 300ml. In a plastic cartridge, 24 cartridges/ carton
2. Colors: clear, black, silvery gray, white.
3. Stored in cool and dry place, the shelf life is 9 months.
Description
ZJ-666 Neutral Silicone mildew proofing Sealant is a one part, neutral curing sealant specifically designed for the sealing of sanitary fittings, including baths, showers, sinks, urinals and ceramic tile joints. It is mildew and fungus resistant. Characteristic
a. Can be easily used and extruded any time.
b. Superior mildew-proofing, keep pleasing to the eyes and sanitary in conditions of dark and high humidity.
c. Excellent contact change and extrusion ability, in any air temperature (-40℃ to 100℃) can extrude easily.
d. Excellent adhesion to most building materials.
e. Outstanding weatherproofing ability, Excellent tensile and compression restoring ability.
F. Neutral curing, no corrosive to stone, ceramics, concrete, metal and glazing glass, etc. Over come the weakness of acetic sealants (normal glass sealants) erodes the materials. Where to use
ZJ-666 is fit for fixing up and sealing all kinds of kitchen utensil and sanitary equipment with weatherproofing and mildew proofing, like baths, showers, sinks, urinals and ceramic tile joints. Joint sealing to glass, marble and aluminum plate curtain wall; Fix up all kinds of glass door and window; Application for automotive, ship, packaging advertisement and family decoration. Use limitations
ZJ-666 is not fit for structural usage. It should NOT be applied in the following conditions:
a. To all materials that bleed oils, plasticizers or solvents, and green or partially sulfur zed gaskets or tapes, etc.
b. In totally confined space (Silicone sealant need the water in the air to cure)
c. For continuous immersion in water or below-grade applications all the year.
d. To painted surfaces, may cause seal failure as the paint cracking or paint stripping
e. To frost laden or wet surfaces
f. Surface touch the food directly
g. Easily suffer mechanical clash Typical properties (for reference)
The following data is for reference, is not suggested to make standard
GB/T1___Chinese national standard
Material featureZJ-666 can keep good viscous degree and can easily extrude at -25 to 50℃; it has an excellent compatibility with reflect glass, doubling glass, silicone hollow glass, acrylic acid, polythene and etc. Colors
ZJ-666 is available in four standard colors: white, black, and grey, brown. We can also supply the other color according to the customer’s requirement. Specifications
JC/T885-2001 25HM; and GB/T1741-1989 mildew Proofing grade 0. Packing
300ml plastic cartridges, 24 cartridges per carton. Storage and usable life
When stored under dry and airy, 27℃ or lower temperature conditions in the original unopened container, ZJ-666 has a shelf life of 12 months from the date of manufacture. Construction project technology service
It’s needed to take the design, choose materials, operation into consideration for the structural joint sealing. The technical communication between suppliers and applicants are necessary for the present situation: varied sealant types, daily changing materials and the compatibilities between surface treatment and materials. Hangzhou Zhijiang Silicone Chemicals Co., Ltd. gives construction project technical services as follows:
Adhesion Testing
ZHIJIANG Silicone will evaluate tests about the adhesion of our products to job site or representative job site materials in standard laboratory. Results of the adhesion testing, product recommendations and surface preparation will be forwarded in writing.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, ZHIJIANG will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other ZHIJIANG Silicone sealants.
Stain Testing
Because of the staining problems that may occur with porous substrates, ZHIJIANG is willing to run laboratory tests and provide information to you on the possibility of staining occurring with the construction materials being used. Weatherproofing joint design
Wider joints accommodate more movement than narrow joints. When ZJ-666 is being used for wide movement joint, a minimum depth of 6 mm and a maximum 12mm sealant/substrate bond is necessary to ensure adequate adhesion. A properly designed moving joint will have a 2:1 width to depth ratio.
The expansion and contraction of joints is mainly caused by season or daily temperature changes. The designed joint width is at least double estimated movement, better quadruple to remedy errors of materials and application. All size of joints should be gotten through calculation of joint movements, especially wider joint size necessary for plastic board with higher thermal expansion rations. Application
Surface clean
Cleaning all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts.
Metal and glass should be cleaned by two-cloth. The solvent used will be methyl ethyl ketone, tolune or xylene and observe the using rule. If for plastic, use the guided solvent from suppliers.
Depending on the condition of the surface, porous substrates may require abrasion cleaning, solvent cleaning or both. Surface must keep dry and clean. Dirties and other impurities should be blew off by non-oily compressed air or gulfed by vacuum cleaner.
Priming
It’s commonly not necessary for priming on using zhijiang silicone sealant. If recommending primer after adhesion tests pour zhijiang primer to a clean, dry, lint-free cloth and gently wipe surface till a thin film formed. Later application.
Masking
Masking tape should be used to keep excess sealant from contacting adjacent areas where it is not intended, to ensure an aesthetically pleasing job. Tool the sealant with light pressure before a skin begins to form (typically 10 to 20 minutes). Remove the masking tape before the sealant skins over.
Backer materials
Generally, three common backer rod types can be used: Open-cell polyurethane, Closed-cell polyethylene, Non-gassing polyolefin. When a backer rod cannot be positioned in a joint opening, a Teflon or polyethylene tape should be used to prevent three-sided adhesion.
Application
Install backing material or joint fillers. Set blocks, shims and tapes. Cut the nozzle of ZJ-666 and fit into gun and make extrusion diameter fit for joint. Continuous extrude sealant into joint without air forming. Care must be taken to ensure complete fill of the sealant cavity. Tool the sealant with light pressure before a skin begins to form. Make sealant surface a sunken shape using raised tool. Not use soap water for assistant. Remove the masking tape after tooling. The sealant for bottom joints should be tooled into slope to protect water accumulation. The surface of sealant should be dry and frost-free. The uncured sealant is not permitted to contact with polished granite, metal or glass to preventing a thin film formed on the substrate surface to affect the esthetic things. Use masking tape. If sealant contact with non-porous material, clean out with methyl ethyl ketone, tolune or xylene.
Sealant repair
If a sealant has failed, it is good practice to understand why it failed and decide which measure to take. To see:Whether aging of original sealant;Joint movement over the bearing ability for sealant;
Adhesion loss or incompatibility between sealant and joint material;Thickness not proper of sealant;Others. Handling precautions
This paper doesn’t include MSDS for product. It should be notified:
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant at children’s reach.
Product Number :
ZJ-998
product Name:
Polysulphide Sealant for Insulating Glass
Product Number :
ZJ-301
product Name:
Butyl Sealant for Insulating Glass Primary Seal
Product Number :
product Name:Butyl waterproof tape
Product Number :
ZJ-303
product Name:
waterproof acrylic sealant
Product Number :
ZJ-304
product Name:
Window and Door Acrylic Sealant
Description
ZJ-311 is one-part room temperature curing polyurethane adhesive with good adhesion property. It reacts with moisture in the air to form a kind of elstomer with high strength, aging resistant, vibration exhaustion resistant, low temperature resistant and corrosive resistant properties. Where to use
Direct glazing and sealing for windshield glazing, glass fiber reinforced plastic fittings, installation in automotive, accessory, auto steel and aluminum board. Characteristic
Fast tack free High adhesion strength
Neutral Good chemical corrosion resistance
Good water proof Paint able
One part no mixing excellent weather proof, aging resistant property
Abrasion able excellent noise, vibration and Impaction resistant
Damp resistant No sagging
Anti mildew
Technical Data
Packaging
300ml aluminum cartridge, 12 cartridges /carton
400ml and 600ml sausage, 20 sausages /carton
At 5℃~25℃ shady, dry place, 6 months of shelf life. Technical Service
Full support for customer in Technology Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Primers may be required to achieve optimal adhesion. Smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
ZJ-311 don’t need mixing and use directly.
Spreading
Spread ZJ-311 on base material with enough pressure and thickness not less than 1 millimeter. Note
Full cure (dry 7 days under 20℃) for ZJ-311 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang’s technician.
Application temperature is between 5 ℃ and 35 ℃. Paint Able Property
ZJ-311 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm. Anti Fire
ZJ-311 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor. Pretest Process
Zhijiang will sample all related material and do testing to decide best adhesive type and best performance to preventing any potential problems. Please ask for Zhijiang’s technician for more specifics.
Description
ZJ-311 is one-part room temperature curing polyurethane adhesive with good adhesion property. It reacts with moisture in the air to form a kind of elstomer with high strength, aging resistant, vibration exhaustion resistant, low temperature resistant and corrosive resistant properties. Where to use
Direct glazing and sealing for windshield glazing, glass fiber reinforced plastic fittings, installation in automotive, accessory, auto steel and aluminum board. Characteristic
a. Room temperature curing, no sagging
b. Good adhesion strength, wide application range for base materials
c. Good chemical corrosion resistance and excellent weather proof
d. Excellent aging resistant property
e. Excellent noise, vibration and impaction resistant
f. Good damp resistant and anti mildew
g. Paint able, abrasion able
Technical Data (for reference)
Packaging
300ml aluminum cartridge, 12 cartridges /carton
400ml and 600ml sausage, 20 sausages /carton
At 5℃~25℃ shady, dry place, 6 months of shelf life. Technical Service
Full support for customer in Technology Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Primers may be required to achieve optimal adhesion. Smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
ZJ-311 doesn’t need mixing and use directly.
Spreading
Spread ZJ-311 on base material with enough pressure and thickness not less than 1 millimeter. Note
Full cure (dry 7 days under 20℃) for ZJ-311 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang’s technician.
Application temperature is between 5 ℃ and 35 ℃. Paintable Property
ZJ-311 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm. Anti Fire
ZJ-311 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor. Pretest Process
Zhijiang will sample all related material and do testing to decide best adhesive type and best performance to preventing any potential problems. Please ask for Zhijiang’s technician for more specifics.
Description
ZJ-900 MSALL Sealant is one component, primer less, can be painted, high quality joint sealant based on MS polymer technology, ideal for all sealing and boding on all materials. It is solvent free, environmental protection product. Characteristics
a. Friendly to user and environment: no solvent, halogens, isocyanates, odorless
b. Can be painted
c. Easy to use at a wide range temperature, even in damp environment
d. High bonding strength, special for porous material, smooth and wet surface
e. Excellent weather proofing ability
f. Fast cure even at low temperature
g. Permanent elasticity after cure
h. Neutral curing, no pollution for stone, concrete Where to use
ZJ-900 is widely used as followings:
(1) Sealing and bonding in housing area, bus, train, elevator, air conditioner, ventilation equipment.
(2) Used for installing fixed panel frame, windowsill threshold, and suitable for sealing on all materials surface, like painted metal, glass, wood, concrete, marble, natural stone, granite, bricks, mirrors, aluminum, steel, lead, zinc, common plastics, polystyrene, polyurethane and so on.
(3) Sealing the joint of ceiling, timber, gaps of water pipe, gutter on roofs, moved rooms, container, marine.
(4) Apply for interior and exterior family decoration, like floor adhesive systems, particular for laying floor tiles.
(5) Mildew proofing, suitable for kitchen, bathroom
Notice: It is not suitable for PE, PP, and Teflon. Technical data (for reference)
The fallowing data is for reference and is not suggested to make standard
Packing
300ml plastic cartridge
Standard color: black, white and grey.
We can also supply the other color according to the customer’s requirement. Storage
It has a useable life of 12 months from the produced date when stored under dry and airy,27℃ or lower temperature conditions in the original unopened packaging. Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways. Make sure the surface be clean, free of dust and grease
Priming
Commonly it is no need of primer. In case the adhesion test requires primer, put Zhijiang primary coat on a white cloth without flock-off, then wipe the surface of the basic material. After the primary coat dry, apply the sealant.
Spreading
Spread the sealant on base material with enough pressure and thickness not less than 1 millimeter if for bonding. If it is used for sealing, extrude the sealant full of the joint. And then leave to cure. Paintable Property
It could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm. Another, painted after 48 hours if thickness more than 3mm. Handling Precautions
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant out of children
GLASS MANUFACTURER PRODUCT LIST
======================================
Silicone sealant
Polysulphide sealant
Butyl sealant
Acrylic sealant
Polyurethane sealant
MS Sealant
Others
New Products
Painting
GLASS MANUFACTURER CONTACT INFO
======================================
Add: Huangjiahe,Shushan Street Xiaoshan District Hangzhou City Zhejiang China
Tel: 86-571-82392772
86-571-82393580 Fax: 86-571-82392772
86-571-82363371
Hot line for service: 86-571-82392772
86-571-82393580 E-mail: export@chinazhijiang.com
P.C: 311203
GLASS MANUFACTURER COMPANY PROFILE
======================================
Hangzhou Zhijiang Silicone Chemicals CO., LTD, located in Hangzhou, Zhejiang Province, China, established in 1996, specialized in sealant research, produce and sales, is a hi-tech and joint-stock company. Now we are one of the most important manufacturers and suppliers at home and abroad, offering a wide range of new chemical products for construction, automobile and machinery. Due to the super excellent and steady performance, our products have been named the “CHINA TOP BRAND” and our “JINSHU” trademark has been named “CHINA WELLKNOWN TRADEMARK”. Now our trademark “JINSHU” and “ZHIJIANG” are registered in more than 30 countries, like European Union, USA, India, and Andorra and so on.
.Butyl sealant .Acrylic sealant
.Polyurethane sealant .Modify polyurethane sealant
.Butyl waterproof tape .Anchor adhesive
.Epoxy Structural Sealant for constructions .Gasket silicone sealant