Tempered glass Heat Soak Furnace Glass Table Bending&Tempering Furnace EVA Glass Laminating Furnace

======================================
GLASS MANUFACTURER MAIN PRODUCT                                   
======================================

Ddd4a9abc785ff1a

Tempered glass heat soak furnace FY-JZ 
  Introductions
 The machine FY-JZ2500/5000 is the supporting equipment, which is usded in the pst process of tempered glass manufacturing. It can have the glass not homogenized in internal stress self-exploded. Thus can avoid unsafe factors of tempered glass.The machien is made according to the sdantard of EN14179-1:2005

 Prinsiple of electronic control system

   When start,set how much the time for homogenizing,cooling,and the top and bottom limit of temperature.Pressing the HEATING butom,all the tempreture controling process will work automatically.The temperature acquisition module can collect and exist temperature curve current or historical.The historical temperature curve can be inquired by enter any stage of time.The time curve can be print out.
Main function
Crrnt time curve can be exist automatically;
Hstorical time curve can be exist automatically(can be kept).
Time curve can inquire and print automatically;
Recording the working condition of the machine automatically.
Temperature controlled by PID,time curve can set according to needs.
Main parameter
Outside size: 6100*3600*4200mm
   Inner size: 5850*1900*2750mm
Specification of glasses
 Maxi. size for flat tempering glass:  L5000*W2500
  Thickness of glass: 3-25mm
Performance of this machine:Meet EN14179、DIN18510-4 and CE standard;
Total power: 259.5 KW
 

33e5eb64c785ff1a

Glass table bending&tempering furnace FY-CJG 
The machine’s principle: to move the glass with the mold into the machine to heat,
after the glass is bended with correct form, to move out the heating glass,
 then to cool it quickly. Aggrandize finish that be get a piece of bended tempered glass.
It can be operated automatically and manually.
The machine can produce one or two right angle tempered glass.
It is suitable for manufacturing tea table glass. Its feature is invest little,
consumed the electricity low, high efficient.

Parameter:
Process glass parameter: Thickness  10-19mm
                       Maxi. Glass: 2300*700mm
    Maxi. Glass table: 1300*750mm
    Mini. Glass: 2000*200mm
    Mini. Glass table: 1000*200mm
2. Power: 375KW
3. Dimension (L*W*H): 9560*3150*2900mm
4. Speed:  8 PCS/Hour (glass 12mm)
5. Successful ratio: 98%above (main factory such as temperature control, mold-made technology, wind palisade adjusted and glass quality etc.)

390ffa63c785ff1a

Glass vacuum laminating machine FY-ZK-5 
Suitable film and technology

    Use modified EVA film (also called EN film) or similar film. After film is closed under ambient condition, then put it into silica rubber bag researched by the company or enclosed by silica rubber strip, then enter into this machine and process is in accordance with the specified procedure. Besides this machine can produce ordinary laminated glass, also other laminated glass made from PC sheet, PET flake, decorative paper or cloth, color film or metallic wire net as well as carry out encapsulation of solar battery.
Configuration accompanied the machine
    Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 5 layers silica rubber bags, furnace body and electric load/unload section.
Parameter
1. Dimension (L*W*H):3600*2200*2000 mm
2. MAX. area of glass to be processed: 3100*1700 mm 5 layers silica rubber bags (its size: 3350*1950mm)
3. Thickness: 3-15mm
4. Power: 43KW
5. N.W: 2.5T
(Note: If producing laminated glass thickness is over 10 mm, the area will reduce suitably and the process time will need to prolong.)

A73979d9c785ff1a

Glass vacuum laminating machin-1 layer FY-ZK-2 
Suitable film and technology
    Use modified EVA film (also called EN film) or similar film. After film is closed under ambient condition, then put it into silica rubber bag researched by the company or enclosed by silica rubber strip, then enter into this machine and process is in accordance with the specified procedure. Besides this machine can produce ordinary laminated glass, also other laminated glass made from PC sheet, PET flake, decorative paper or cloth, color film or metallic wire net as well as carry out encapsulation of solar battery. The machine can produce circularly.
Configuration accompanied the machine
    Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 2 layers silica rubber bags, furnace body.

Parameter.
1.Dimension:3800*2200*2000mm
2. Maxi. glass:3100*1700mm
3.2 layers silica rubber bags
4.Thcikness:3-15mm
5.Power:41.5kW
6.N.W:2.0T
 

0e017ecec785ff1a

Glass vacuum laminating machine-2 layers FY-ZK-2 

Suitable film and technology
 Use modified EVA film (also called EN film) or similar film. After film is closed under ambient condition, then put it into silica rubber bag researched by the company or enclosed by silica rubber strip, then enter into this machine and process is in accordance with the specified procedure. Besides this machine can produce ordinary laminated glass, also other laminated glass made from PC sheet, PET flake, decorative paper or cloth, color film or metallic wire net as well as carry out encapsulation of solar battery.
Configuration accompanied the machine
 Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 2 layers silica rubber bags, furnace body and electric load/unload section.
Parameter
Dimension (L*W*H):3600*2200*1400 mm
MAX. glass: 3100*1700 mm
silica rubber bags:2 layers
Thickness: 3-25mm
Power: 30KW
N.W: 1.5T

15d31801c785ff1a

Glass heating bending machien FY-W 
    This machine have top and bottom heating chambers, the top chamber is for heating and bottom chamber is for fixing shapes.
Its temperature is controlled by intelligent temperature controller which can be written programs. The platform is elevated by air
cylinder. It is easy to be operated. It takes about 5 hours to finish one time.
    It is suitable for heat bending glass, such as, glass furniture, glass coffee table, glass sanitary right corner counter top and
decorative project glass, etc.

         

         
Parameter:

Type    Thickness(mm)     Outside size(mm)      (L*W*H)     Inner size (mm) (L*W*H)    Power (KW)    N.W(T)
FY-W-A    3—25        2700*1410*1320        2300*1100*800         26      1.2
FY-W-B    3—25        3100*1880*1480        2700*1500*800         50       2

5fdcb203c785ff1a

Glass heating bending machine FY-XH-2 
   The machine can produce by single and cycle furnace. When producing circularly, it’s made up one main furnace and another cooling furnace named vice furnace. The platform for heating rises up and down by electricity. The underneath is operated semi-automatically. Its temperature is controlled by imported PLC. It keeps temperature well, economizes electricity, operates easily, gets high efficiency.
   It’s suitable for heat bending glass furniture, glass table and decorative project glass.

GLASS FISH JAT PRODUCTION LINE FY-YGPL 
Used for glass fish jat. Be formed and annealled one time. Operating is easy, energy consumption is low

Cfdb9817c785ff1a

Glass heating bending machine FY-DX 

  The machine has the completest function.The superstructure heating section can rise up and down automatically to make up for others kinds of bending furnace which can’t process special shape glass. The superstructure is divided main section and subsidiary heating section. The underneath have two heating system. The main heating section and the keeping temperature section can rise up and down automaically to improve the efficiency
 

6599b3bec785ff1a

Glass heating bending machine FY-DS 
The machine is for producing glass table, project arc glass. It is made up of  supper and under section. The supper section is for heating, the other is for forming. The machine is easy to be operated, low enenrgy, high efficience, is suitable for middle or small glass factory.

Paramter
1. thickness: 3-25mm
2.Maxi. size: 2900*1500mm
3.outside size: 3500*2200*1400mm
4.Power:80KW
5.N.W: 3.5T
 

070022d6c785ff1a

Continuously Glass heating bending and fusing machine FY-C 
    This equipment is high efficient and stable in process. It’s low energy consumption by adjusting temperature automatically. Through adjusting data, it can perform high productivity and high precision on continuous heat bending for different thickness glass, such as: appliance glass, small lamp glass, fused glass and glass mosaic.

Glass heating fusing machine FY-R-2 
 The machine can produce fused mirror frame, glass screen, glass fruit plates and glass decoration. It can produce by single or cycle furnace. When producing circularly, it is made up two chambers—main furnace and vice furnace. It operates easily by controlling temperature with automatic. Its temperature is controlled by imported PLC. The platform (furnace lid) rises up and down by electricity. It keeps temperature well, economizes electricity and gets efficiency. 

 

Glass heating fusing machine FY-YZ 
    The machine can produce heat fused glass, decorative glass, fused mirror frame and glass fruit plates, etc. Its temperature is controlled by PLC. It is easy to be operated. It can work automatically. The platform rises up and down by cylinder. It keeps temperature well, saves electricity, and gets high efficiency. 

 

Hand-push Glass sandblasting machine FY-HP 
  Scope of application

  Be applicable to large workpiece sandblasting, such as vessel build and repair, bridge, container, steel structure etc.
  Feature
1. Addopt Japanese ASCON technology
2. complete function, complete set, high efficiency, logical structure, easy operation and maintenance
3. As long as having air source, you can conduct high efficient sandblasting and derusting
  Parameter
1. diameter: 600mm
2. height: 1300mm
3. N.W: 255Kg
4. Cubage: 0.3 m³
5. Nozzle: 1 pcs
6. wheel diameter: 400mm
7. air pressure: 0.7Mpa
8. Air consumption: 3m³/min
9. store: 1 pcs
 

05e944f7c785ff1a

Manu Glass sandblasting machine FY-MP 
  Scope of machine

  By applicable to sandblasting for vertical feeding various kinds of sheet material with width less than 2.4m and length no limit. For instance: flat glass, marble and metal etc. It can be operated manually.
Feature
1. adjusting cyclone separator can separate usable abrasive material from tiny dust. Good abrasive material can be continously used.
2. Use high quality part as main part and component to obtain long life.
Parameter
1. work cabinet nize (mm): L900*W700*H2000mm
2. out put size: L600*W100*H1800mm
3. Power: 220V 50Hz
4. machine lamp: energy saving lamp 220V 13W
5. separator motor: 220V 1.1KW
6. separator wind rate: 8.5 m³/min

08056035c785ff1a

AUTO glass sandblasting machine FY-PS 
  Automatic glass sandblasting machine is mainly used for sandblasting and engraving flat glass. It have two functions: automatic and manual operation. It is controlled by PLC. Height and width of blasting by controll systerm to adjusting parameter can meeting different production rrequimements. With dust collector systerm, It basically is dust-free environment.
Air source of exterior :
Air pressure : 0.3~0.8MPa
Air output :4-6m3/min
1m3 gas storage and purifying equipment for compressed air are needed 

 

GLass washbasins bending&tempering machine FY-FG 
   The machine can make one grinded glass bend into separate basin, take out the product to blow, that is to finish one toughened separate basin. It simplifies the process to save the cooling time. Its temperature is controlled by the import PLC. It operates easily. It is made up heating section, blowing section and load/unload section. It gets high efficiency and its cost is lower.

Parameter
1. thickness: 12-19mm
2. power: 60KW
3. speed: 6-8 basins/hour
4. N.W: 1.2T
5. ratio of quality: 95%
 6. dimension: 2000*1600*1300mm (excluding the blower)

33003069c785ff1a

Glass washbasin heating melting machine FY-SP 
  The machine can manufacture luxuriant connective and separate glass washbasins. Its temperature is controlled by import PLC. It’s made up top and bottom construction. It has load/unload section and heating section. The superstructure rises up and down automatically by electricity. It can produce circularly. It keeps temperature well, economizes electricity, operates easily and gets high efficiency. When producing circularly, you can add one or more vice furnace. After the main furnace finish heating processing, it can be moved to the vice furnace. The main furnace can be used continuously. It increases the efficiency great.

 Parameter:
1. thickness: 12-19mm
2. speed: 4 connective basins per 1.5 hours 6 separate basins per 1.5 hours 3. ratio of quality: 95% (not grinded)
4. power: 380v/38kw 380v/52kw
5. N.W: 1.5T
6. Dimension: 2650*2200*1400mm
7. inner size: 2400*1800*400mmQ
 

65aadfffc785ff1a

Glass washbansins tempering machine FY-XG 
  This machine is used for tempering connective and separate washbasins. It’s controlled by imported PLC with manual and automatic. It has load/unload section, temperature section and tempering section. It saves electricity and it’s high efficient. It takes about 18 minutes to tempering one washbasin.

Parameter:
1. Thickness: 12-19mm
2. Maximum: 1500*600*190mm
3. Speed: 4 connective basins/h 8 separate basins/h (for 12mm)
4. Successful ratio: 95% (grinded)
5. Power : 380V/110KW
6. N.W: 4.5T
7. Dimension: 6500*2150*3250mm
Comparing between toughened and normal basin

 

Glass clear washbasin heating melting machine FY-Q 
  The machine can manufacture connective transparent glass washbasins. It is controlled by the imported PLC. It can operate with automatic constant temperature to promote the successful ratio and the platform rises up and down automatically by electricity. It operates easily, keeps temperature well, gets high efficiency, and economizes electricity.

Glass clear washbasin heating melting machine FY-Q-1 
    The furnace is specifically designed to produce one glass transparent connective basin. It is controlled by imported PLC. It can promote the successful ratio by adjusting temperature automatically. The platform rises up and down by air cylinder. It operates easily, keeps temperature well, gets high efficiency, and economizes electricity.

Parameter
1. thickness: 12-19mm
2. power: 380V/16KW
3. N.W: 0.8T
4. Maximum: L1550*W950mm
5. Dimension: 2000*1310*1270mm
 

38b04b82c785ff1a

Glass washbasins bending&tempering machine FY-PWG 
  This machine can be used for vanity piece of glass bending and tempering, complete with one time, Simplified processes. Reducing the holding time, small electricity consumption, high Efficiency. Can be operate manually and automatically, improve the production rate. This machine is divided into the feed section,bending section and tempering section

  parameters:
1.outside size:L4600*W1700*H1600MM
2.Max. size of glass basin:1200*600mm
3.Max. Arc deep :140mm
4.glass thickness:12-19MM
5.install power:36KW
6.processing speed:2-3 pcs/h
7.yield:95%(require The original glass without collapsing after polishing)
8.weight:2.0T
 

8e741931c785ff1a

Flat glass tempering furnace FY-FT 
  1 ApplicationAFT series flat glass tempering furnaces are mainly designed for

 producing flat tempered glass for architecture,furniture,appliances,instrumentation
,lights,etc. 
2 Main technique characteristicsWide glass size:Maxi.size 8000mmx3500mm,
Min.size Ф60mm
Broad applicability:Float glass,printed glass,patterned glass.Low-E glass.
High-quality product:Up to GB9963 GB9656. ECER43. ANSZ97.1standards.
Advanced heating methods:Radiation and convection heating intellegent
temperature adjustment control.
Convenient data storage:Computer-stored glass-type data recipes for full range of glass types.
Easy operation:friendly Human-Machine interface,full automatical process.
Steady working:High quality components to enable continuous runningRemote
 diagnostic:trouble-shot is available via Internet
Model    Max.Loading Area(mm)    Min.Loading Area(mm)    Thickness(mm)    Productivity(m2/h)    Installed Power(KVA)
FY-FT1003    1000X300    60X60    2.8-8    4    ≥90
FY-FT2006    2000X600    120X50    2.8-12    15    ≥350
FY-FT2008    2000X800    120X50    2.8-12    20    ≥450
FY-FT2010    2000X1000    140X50    2.8-12    25    ≥580
FY-FT2512    2500X1250    250X100    3-15    40    ≥400
FY-FT3612    3660X1250    250X100    3-15    58    ≥500
FY-FT2515    2500X1500    300X100    3-15    48    ≥450
FY-FT4015    4000X1500    300X100    3-19    76    ≥700
FY-FT6015    6000X1500    300X100    3-19    115    ≥900
FY-FT2520    2500X2000    300X100    4-19    64    ≥550
FY-FT8620    3660X2000    300X100    4-19    93    ≥750
FY-FT3624    3660X2440    300X100    4-25    114    ≥800
FY-FT4224    4200X2400    300X100    4-25    130    ≥850
FY-FT5024    5000X2400    300X100    5-25    156    ≥900
FY-FT6024    6000X2440    300X100    5-25    156    ≥1100
FY-FT8024    8000X3000    300X100    5-25    248    ≥1300
FY-FT5030    5000X3000    350X100    6-25    192    ≥1000
FY-FT8030    5000X3000    350X100    6-25    300    ≥1500
FY-FT8035    8000X3500    400X200    6-25    358    ≥1800
Remarks:The above datas were obtained on the base of 5mm float glass with 75% loading efficiency

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
 Tempered glass Heat Soak Furnace

 * Glass Table Bending&Tempering Furnace

 * EVA Glass Laminating Furnace

 * Glass heat bending furnace

 * Glass heat fusing furnace

 * Glass sandblasting machine

 * Glass washbasins machine

 * Flat glass tempering furnace

 * Glass machine accessory
 

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Add:No.3 Waiwei Industrial Zone,No.3 Shiken Village,Nanhai District,Foshan City,Guangdong P.R.China
Tel:+86-757-86253756    86253757
Fax: +86-757-86253758
Web:www.fsfuyuan.cn

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
We are specializing in manufacturing glass heating processing machine from our founding in 1998. We are the first group members of glass industry association. 4 series of machines have gotten CE certificate.
Our machines: glass vacuum laminated furnace, glass heating bending machine, glass heating fusing furnace, glass table bending&tempering furnace, glass heating soak furnace, AUTO/MANU glass sandblasting machines, glass washbasin production line and glass heating process nonstandard machine. ……

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ hello@helloglass.com ] , and you will get the answers of what you need in 24 hours.

Published by cnc@cncGlass.com www.cncGlass.com EVA film glass interlayer

cnc@cncGlass.com www.cncGlass.com EVA film glass interlayer