GLASS MANUFACTURER MAIN PRODUCT
====================================== Insulating glass units shall consist of two or more lites of glass separated by a desiccant filled roll-formed aluminum or steel edge spacer with 4 bent corners and zinc plated steel straight key joint to provide a hermetically sealed and dehydrated space. The spacer contains a desiccant – molecular sieve which eliminates moisture in the cavity. Insulating glass shall be dual seal with a primary seal of black (or gray) polyisobutylene (pib) and a secondary seal of black (or gray) silicone or polysulfide. The combination of two panels of glass and trapped air is what makes an Insulating glass a superior energy efficient method of glazing. The whole unit is hermetically assembled by a double barrier sealant.
Features for insulating glass:
Products Overview
Low-E coated glass is a 2.5-25μm wavelength range of infrared radiation COSCO high reflectivity coating glass, the products have a high visible light transmission rate, at the same time infra-red has a strong role in blocking, it has good insulation properties, in the summer to prevent too much sunlight can enter the room, the indoor winter heat spillover block to meet the energy requirements.
LOW-E glass is an effective energy-saving principle of the radiation so that the rate of glass E value from 0.84 down to 0.25 below. Glass There are three ways of heat transfer; radiation, convection, conduction (as shown). The strength of the absorptive capacity of the glass is directly related to the glass on the far-infrared heat blocking effect. Low-emissivity glass is not easy to absorb the thermal radiation energy from outside, so the glass through conduction, radiation, heat transfer by convection less, Low-E glass is the limit of this part of the heat transfer. The floor of our living room temperature in the winter due to high temperature than the outdoor, LOW-E glass can prevent the indoor to the outdoor heat radiation, and to prevent the spread of heat loss; and outdoor temperature in summer is higher than room temperature, and the summer of LOW-E glass can be Outdoor radiant energy to prevent access to the indoor, so no matter summer LOW-E can play the role of a good thermal insulation with excellent energy saving effect.
Low-E glass production process by way of two off-line Low-E glass and on-line Low-E glass in two.
Off-line Low-E glass features:
① U value of low, significant energy-saving effect.
② wide spectrum of choice, rich colors.
③ multi-product, multi-portfolio changes.
④ better get to meet the design requirements of designers.
Online Low-E glass features:
① chemical properties of stability, not oxidation, can be a single use, long-term storage.
② thermal processing performance is stable, flat steel can be directly carried out, and bend steel, and laminated so on.
③ solid film, good resistance to abrasion.
④ synthetic insulating glass, the edge does not need in addition to film.
Color: net color, light gray, light blue, light green,a variety of colors, etc.
Electrochromic Glass /Switchable Glass
Laminated Glass
Product Specifications
GLASS MANUFACTURER PRODUCT LIST
======================================
Tempered glass
GLASS MANUFACTURER CONTACT INFO
======================================
Welcome to
Nanjing Xinfurui Glass Industries Co.,Ltd. Address: No. 88-3 Shuangqi Road,Jiangning District,Nanjing P.C: 211164
Mobile: 13770987779 13952019977
Tel: 025-51193415、51193223、86131099
Fax: 025-51193223
E-mail: 474229173@qq.com
Website: http://www.xfrglass.com
GLASS MANUFACTURER COMPANY PROFILE
======================================
NANJING XINFURUI GLASS INDUSTRIES CO., LTD. It is a research and development, production, sales and service in a modern high-tech glass processing company, is producing Tempered glass, laminated glass, Hollow glass various industries such as glass, intelligence, electronic control dimming glass series, Perspective Glass, F79B-25-XFR 1 type Armored glass, light glass professional manufacturer of special glass, with modern production lines, first-class equipment and technical staff, managers, high-quality staff. Five professional processing workshop, Tempered glass workshop, laminated glass workshop, dimming glass workshop, Armored glass workshop, Perspective Glass Workshop. Company production base in Nanjing, the business covers national and international markets.
Passed the ISO 9001 quality system certification, the mandatory building safety glass “3C” certification. Dimming glass by GB18045-2000/GB9656-2003 Railway vehicle / vehicle testing national standards of safety glass.
1、World Expo 2010 Shanghai Jiangsu Museum, the World Meteorological Museum, Museum of Pakistan, China Telecom Building, 6F Experience Museum
2、FAW-Volkswagen car show (Pudong Airport and Beijing Airport, Tianjin Airport, Shenyang Airport 11 Airport)
3、10 floor office building and Shanghai Banking Corporation office lobby
4、Business Hotel Hangzhou International Conference Center.
5、Boeing Beijing Office
6、The national command center Kunlun Gas
7、Kazakhstan (Auto Windshield) the United States. Singapore. Laos
8、Nanjing Greenland Financial Center (Jiangsu undertaking of a high) built-in glass